Post on 2017-08-08 Toy RC Vehicles Parts Matek Spare Parts
Specifications and details of FPVDrone Matek PDB-XT60 Power Distribution Board BEC-5V/2A 12V/0.5A with XT60 Plug for DIY Quadcopter Helicopter
Brand : Matek
Binding : Toy
Product Group : Toy
UPC : 757450335984
EAN : 0757450335984
MPN : MC223
Publisher : Matek
Manufacturer : Matek
Label : Matek
Package Dimensions : 0.51 x 5.51 x 4.49 inches
Weight : 0.04 pounds
Feature of FPVDrone Matek PDB-XT60 Power Distribution Board BEC-5V/2A 12V/0.5A with XT60 Plug for DIY Quadcopter Helicopter
The pdb-xt60 has been engineered to provide the highest possible performance and reliability in a 36*50mm & 4 layers pcb.
It distributes power from a lipo pack to 6 escs, as well as providing synchronised regulated dc 5v outputs linear regulated dc 12v for powering cameras, servos, rc receiver, flight controllers, video transmitters, leds, etc.
The pdb-xt60 offers a authentic amass xt60 plug to connect the lipo pack conveniently.
4-layer pcb board, high current power and bec stratification, avoid ground disturbance bec power current;.
This board makes the wiring nice, with the bonus of having the xt60 option. Stacked right on top of the cc3d with plenty of room.
Reviews of FPVDrone Matek PDB-XT60 Power Distribution Board BEC-5V/2A 12V/0.5A with XT60 Plug for DIY Quadcopter Helicopter
- Input voltage range (3S-4S LiPo operation): 9 - 18V DC
- Regulated 5V and 12V outputs
- LED power indicators ( 5V & 12V outputs )
- 6 ESC outputs & 1 pair VCC/GND pads
- Continuous current: 25A*4 or 15A*6
- Peak current (10 seconds/minute): 30A*4 or 20A*6
BEC 5V output:
- Designed for RC Receivers, Flight controllers, OSD, and Servos.
- DC/DC synchronous buck regulator.
- Voltage: 5.0 +/- 0.1VDC
- Continuous current: 2 Amps (Max.2.5A 10s/minute)
- Output Ripple: 40mV (VIn=16V, [email protected] load)
- Short-circuit tolerant (5 seconds/minute)
BEC 12V output:
- Designed for Video TX or FPV camera with linear regulator.
- The battery should be 4S LiPo (13~18V DC)
- Voltage: 12.0 +/- 0.3VDC
- Continuous current: 500mA (Max.0.8A 5s/minute)
- Short-circuit tolerant (2 seconds/minute)
BEC 12V @ 3S LiPo
- Output voltage= 3S LiPo voltage -1V Physical:
- Dimensions: 36 x 50 x 4 mm (without XT60)
- Mounting: 30.5 x 30.5mm, Φ3mm
- Weight: 7.5g(w/o XT60), 11g(w/ XT60)
- 2oz copper, 4-layers &1.6mm PCB.
- Built-in XT60 Socket
- Total 6 pairs ESC solder tabs are fit for H or X type frame 5V & 12V Output LED
- indicators & Short circuit tolerant
1 x Matek Systems PDB-XT60
Price : $16.99Buy Now : $9.89
as of 2017-12-16 15:24:33You save :$7.10
Buy Now Click here
--- Product prices and availability are accurate as of the date/time indicated and are subject to change.
--- Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
--- Timezone : America/New York
FPVDrone Matek PDB XT60 Power Distribution Board BEC-5V/2A 12V/0.5A with XT60 Plug for Quadcopter Customer reviews
Other products by Matek.
Other Drones FPV RC Helicopter and QuadCopter Toys Products