Post on 2016-05-19 Toy Toy Usmile Spare Parts
Specifications and details of Usmile® Naze32 Upgrade SP Racing F3 Flight Control for Mini Micro FPV Racing QuadCopter Multicopter with Barometer and Magnetometer (Deluxe)
Brand : Usmile
Binding : Toy
Product Group : Toy
UPC : 735980949147
EAN : 0735980949147
MPN : SPRFD
Manufacturer : Usmile
Label : Usmile
Package Quantity :1
Package Dimensions : 0.20 x 2.00 x 2.00 inches
Feature of Usmile® Naze32 Upgrade SP Racing F3 Flight Control for Mini Micro FPV Racing QuadCopter Multicopter with Barometer and Magnetometer (Deluxe)
Designed to give awesome flight performance based on tried and tested sensors whilst also providing unparalleled I/O capabilities in a small and extremely lightweight form-factor using a next-generation CPU.
The SPRacingF3 gives you all the features you need for the heart of your aircraft, whether you're into FPV racing, acrobatic flying or aerial photography it's perfect.
Next-generation STM32 F3 processor with hardware floating point unit for efficient flight calculations and faster ARM-Cortex M4 core.
No compromise I/O. Use all the features all the time; e.g. Connect your OSD + SmartPort + SBus + GPS + LED Strip + Battery Monitoring + Sonar + 8 motors - all at the same time! Loop times up to ~2x as fast as previous-generation STM32F1 based boards.
Full support for OneShot ESCs for easy PID tuning and a sharper response.Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers. No external inverters required (built-in).Supports a variety of aircraft, tricopters, quadcopters, hexacopters, octocopters, planes and more.
Reviews of Usmile® Naze32 Upgrade SP Racing F3 Flight Control for Mini Micro FPV Racing QuadCopter Multicopter with Barometer and Magnetometer (Deluxe)
Strip + Battery Monitoring + Sonar + 8 motors - all at the same time!
On-board high-capacity black box flight log recorder - optimize your tuning and see the results of your setup with-out guesswork (Acro and Deluxe).
Stackable design - perfect for integrating with OSDs and power distribution boards.
16 PWM I/O lines for ESCs, Servos and legacy receivers. 8 available on standard pin headers. 8 via side mounted connectors.
Dedicated output for programmable LEDs - great for orientation, racing and night flying.
Dedicated I2C port for connection of OLED display without needing flight battery.
Battery monitoring ports for voltage and current.
Sonar support for precision low-altitude hold.
Buzzer port for audible warnings and notifications.
Developer friendly debugging port (SWD) and boot mode selection, unbrickable bootloader.
Symmetrical design for a super tidy wiring.
Wire up using pin headers, JST-SH sockets or solder pads. Use either right-angled or straight pin-headers.
Barometer mounted on the bottom of the board for easy wind isolation.
Configuration of the flight controller via a cross-platform GUI (Windows/OSX/Linux).
36x36mm board with 30.5mm mounting holes.
STM32F303 CPU with FPU 256kB flash.
8MB (64Mbit) High-Capacity Flash (Acro and Deluxe).
MS5611 barometer (Deluxe only).
HMC5883 magnetometer (Compass Sensor, Deluxe only).
Micro USB socket.
4x 4pin JST-SH sockets (I2C, SWD, 2xUART).
2x 8pin JST-SH sockets (PPM, PWM, SERIAL RX, GPIO, ADC, 3V, 5V, GND).
8x 3pin though-holes for pin headers for ESC/Servo connections.
2x 4pin though-holes for pin headers for 2x serial ports.
2x 2pin though-holes for pin headers for battery voltage and buzzer.
Package includes 1x SP Racing F3 Flight Control(Deluxe)
Buy Now Click here
--- Product prices and availability are accurate as of the date/time indicated and are subject to change.
--- Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
--- Timezone : America/New York
Usmile® Naze32 Upgrade SP Racing F3 Flight Control for Mini Micro FPV Racing QuadCopter Multicopter with Barometer and Magnetometer (Deluxe) Customer reviews
Other products by Usmile.
Other Drones FPV RC Helicopter and QuadCopter Toys Products